Products
EX-TB Series Switching Type Programmable DC Power Supply
EX-TB Series Single Output products are high-performance and high-efficiency programmable DC power supply with RS232C, RS485(RJ-45 type) interface based on SCPI (Standard Commands for Programmable Instruments) protocol and the combination of bench-top and system features in these power supplies provides versatile solutions for your design and test requirements in the industrial fields, R&D institute center and education fields.
Dimension
600W, 1.2kW : 265mm(W) x 75mm(H) x 404mm(D)1.8kW, 2.4kW : 265mm(W) x 150mm(H) x 404mm(D)
-
1 Power switch 10 Current Encoder Knob 2 16Character, one line LCD Display 11 Volt Cursor or Menu Change Key 3 Error Lamp 12 Curr Cursor or Menu Change Key 4 Limit Display Lamp 13 Output ON/OFF Key 5 Key Lock Lamp 14 IO/Local Setting and Error Display Key 6 Remote Interface Lamp 15 Protection Setting and Front-panel Lock Key 7 CV Mode Lamp 16 Volt/Curr Setting Limit Display Key 8 CC Mode Lamp 17 Store or Calibration Key 9 Voltage Encoder Knob 18 Recall or Factory Key - Bench top size for up to 2.4kW power with 265mm(W) x 75mm(H)/150mm(H) x 404mm(D)
- 4-Digit Display Resolution
- 16×1 Big-Char Type LCD Display attached
- Adjustment encoder provided for voltage and current
- OVP (Over Voltage Protection), OCP (Over Current Protection) Protection Mode provided
- UVL (Under Voltage Lock), OVL (Over Voltage Lock), UCL (Under Current Lock), OCL (Over Current Lock)
- Calibration function provided (manual and PC)
- Panel Lock function provided
- Memory Store & Recall function provided (It is possible to store and recall 10)
- Output ON/ OFF function (Signal control is optional)
- Limit Display function provided
- 11 diverse Factory Modes provided
- RS-232C, RS485 Communication mode is basic(TCP/IP communication is optional)
- Single phase, AC Input 220VAC ±10% and 3 phase AC Input(option)
-
-
COMPACT SIZE
-
EX-TB Series is the smaller DC Power Supply which size is with 265mm(W) x 75mm(H)/150mm(H) x 404mm(D) up to 2.4kW.
It is developed from EX Series to provide spatial efficiency and same specification for customers.
-
-
-
PROTECTION MODE
-
Built-in OVP (Over Voltage Protection) and OCP (Over Current Protection) protection mode block the output when the output voltage and current are over the limit which user sets to protect the the load.
This can be used for safety despite user’s negligence or even while conducting test for a long time.
-
-
-
DUAL CONTROL ENCODER
-
Control encoder allocated to voltage and current respectively enables setting up faster to the desired mode compared to the existing single control encoder.
It is designed in a way that even the first time programmable product users can use it easily, and thus it can be applied to various areas.
-
-
-
MEMORY STORE & RECALL
-
It can save and recall the voltage, current and state of use that user set ,even you are not an engineer, the user can easily use this function to inspect production and still can apply it for the reliability test etc by using this function that recalls the memory which was saved in advance.
-
Line-Up and Specification
Model
Voltage Current
Watt
Dimension
EX20-30TB 20V
30A
600
265mm(W) x 75mm(H) x 404mm(D)
EX20-60TB 60A
1,200
265mm(W) x 75mm(H) x 404mm(D)
EX20-90TB 90A
1,800
265mm(W) x 150mm(H) x 404mm(D)
EX20-120TB 120A
2,400
265mm(W) x 150mm(H) x 404mm(D)
EX30-20TB 30V
20A
600
265mm(W) x 75mm(H) x 404mm(D)
EX30-40TB 40A
1,200
265mm(W) x 75mm(H) x 404mm(D)
EX30-60TB 60A
1,800
265mm(W) x 150mm(H) x 404mm(D)
EX30-80TB 80A
2,400
265mm(W) x 150mm(H) x 404mm(D)
EX50-12TB 50V
12A
600
265mm(W) x 75mm(H) x 404mm(D)
EX50-24TB 24A
1,200
265mm(W) x 75mm(H) x 404mm(D)
EX50-36TB 36A
1,800
265mm(W) x 150mm(H) x 404mm(D)
EX50-48TB 48A
2,400
265mm(W) x 150mm(H) x 404mm(D)
EX60-10TB 60V
10A
600
265mm(W) x 75mm(H) x 404mm(D)
EX60-20TB 20A
1,200
265mm(W) x 75mm(H) x 404mm(D)
EX60-30TB 30A
1,800
265mm(W) x 150mm(H) x 404mm(D)
EX60-40TB 40A
2,400
265mm(W) x 150mm(H) x 404mm(D)
EX80-7.5TB 80V
7.5A
600
265mm(W) x 75mm(H) x 404mm(D)
EX80-15TB 15A
1,200
265mm(W) x 75mm(H) x 404mm(D)
EX80-22.5TB 22.5A
1,800
265mm(W) x 150mm(H) x 404mm(D)
EX80-30TB 30A
2,400
265mm(W) x 150mm(H) x 404mm(D)
EX100-6TB 100V
6A
600
265mm(W) x 75mm(H) x 404mm(D)
EX100-12TB 12A
1,200
265mm(W) x 75mm(H) x 404mm(D)
EX100-18TB 18A
1,800
265mm(W) x 150mm(H) x 404mm(D)
EX100-24TB 24A
2,400
265mm(W) x 150mm(H) x 404mm(D)
EX150-4TB 150V
4A
600
265mm(W) x 75mm(H) x 404mm(D)
EX150-8TB 8A
1,200
265mm(W) x 75mm(H) x 404mm(D)
EX150-12TB 12A
1,800
265mm(W) x 150mm(H) x 404mm(D)
EX150-16TB 16A
2,400
265mm(W) x 150mm(H) x 404mm(D)
EX200-3TB 200V
3A
600
265mm(W) x 75mm(H) x 404mm(D)
EX200-6TB 6A
1,200
265mm(W) x 75mm(H) x 404mm(D)
EX200-9TB 9A
1,800
265mm(W) x 150mm(H) x 404mm(D)
EX200-12TB 12A
2,400
265mm(W) x 150mm(H) x 404mm(D)
EX300-2TB 300V
2A
600
265mm(W) x 75mm(H) x 404mm(D)
EX300-4TB 4A
1,200
265mm(W) x 75mm(H) x 404mm(D)
EX300-6TB 6A
1,800
265mm(W) x 150mm(H) x 404mm(D)
EX300-8TB 8A
2,400
265mm(W) x 150mm(H) x 404mm(D)
-
Options
- RJ45 to RS232C cable
- RS-232C cable
- RS- 485 cable
- TCP/IP communication
- Output ON/OFF signal control
- Analog Programing(Vout & Iout voltage programming) & Monitoring(Output Voltage & Current Monitoring) by 0~5V or 0~10V, Isotated type
- AC Power Cord(Other type)
- AC Input 380V or 400V± 10%, 3-phase 4-wire system(R,S,T,N,G), 50~60Hz
- AC Input 200V or 220V± 10%, 3-phase 3-wire system(R,S,T,G), 50~60Hz
-
Accessories
- AC Power Cord(Type F)
- Operating Manual(QR Code)
- Demo software program(QR Code)
-
-