제품소개
view
OPE-DI Series Linear Programmable DC Power Supply
OPE-DI Series is high performance programmable DC power supply with RS232C or RS485 interface based on SCPI (Standard Commands for Programmable Instruments) protocol and the combination of bench-top and system features in these power supplies provides versatile solutions for your design and test requirements in the industrial fields, R&D institute center and education fields.
Dimension
PE-3010DI : 300mm(W) x 150mm(H) x 465mm(D)OPE-3050DI : 426mm(W) x 356mm(H) x 650mm(D)(8U)
OPE-30100DI : 426mm(W) x 844mm(H) x 550mm(D) Rack Mount
Others : 19’ Rack Cabinet Size (Please contact us to inquire about it)
-
1 LCD Display 10 P2 CC Mode Indication Lamp 2 Encoder Knob for Volt/Curr Change 11 Tracking Mode Indication Lamp 3 IO/Local & Remote Key 12 Remote Control Mode Indication Mode 4 Output ON/OFF Key 13 P1 + Output Terminal 5 Volt/Curr Selection or Limit Display Key 14 P1 – Output Terminal 6 Output Channel Selection or Tracking Mode Key 15 P2 + Output Terminal 7 Cursor or Menu Change Key(or Store Key) 16 P2 – Output Terminal 8 Cursor or Menu Change Key(or Recall Key) 17 Power ON/OFF Switch 9 P1 CC Mode Indication Lamp - 3-Digit Display Resolution
- 16×2 Big-Character Type LCD Display
- CV/CC Mode
- Output ON/OFF Function
- Memory Save and Recall(Up to 5 operation states)
- Analogue Input & Signal Output Control(Option, Isolated type)
- RS-232C communication interface(RS-485 is Optional)
-
-
TRACKING MODE
- Two channels can be controlled at once.
If single channel power supply was supplied for each producer when it comes to your company’s mass production system, replace it with the power supply in two channels that supports our company’s tracking mode!
There is no need to set up two channels’ voltage and current which is cumbersome.
Instead, pressing simply one button, the tracking mode button can set up two channels in the same way using only one setting for the voltage, current and all the functions.
-
-
-
STORE & RECALL
- Save and Recall Voltage and Current set by user easily.
OPE Series can store and recall the voltage and current set by user.
Even when a user is not an engineer, the user can use it easily for the production, product inspection, reliability test etc., with the Store and Recall function that set up and stored in advance.
-
제품라인업 및 사양
Current
Voltage1A
2A
3A
4A
5A
10A
20A
9V
–
–
–
–
–
OPE-910DI
OPE-920DI
18V
–
–
–
–
–
OPE-1810DI
–
30V
–
–
–
–
–
OPE-3010DI
–
50V
–
–
–
–
OPE-505DI
– – 80V
–
–
OPE-803DI
–
– – – 100V
–
OPE-1002DI
OPE-1003DI
–
– – – 150V
OPE-1501DI
OPE-1502DI
–
–
– – – 200V
OPE-2001DI
– – –
– – – 250V
OPE-2501DI
–
–
–
–
–
–
300V
OPE-3001DI
–
–
– –
–
–
Current
Voltage30A
50A
80A
100A
9V
OPE-930DI
–
–
–
Model
ParameterOPE-3010DI
OPE-3050DI
OPE-30100DI
Output rating 0~30V, 0~10A
2CH0~30V, 0~50A
2CH0~30V, 0~100A
2CHResolution
Programming/Readback
≤ 7.5mV / ≤ 4mA
≤ 7.5mV / ≤ 15mA
≤ 7.5mV / ≤ 25mA
Display Meter
100mV / 100mA
100mV / 100mA
100mV / 1A
Programming Accuracy (@25℃ ±5℃)±(%of output + offset)
Voltage
0.2% + 200mV
0.2% + 200mV
0.2% + 200mV
Current
0.2% + 50mA
0.2% + 250mA
0.2% + 500mA
Read-back Accuracy (@25℃ ±5℃)±(%of output + offset)
Voltage
0.2% + 200mV
0.2% + 200mV
0.2% + 200mV
Current
0.2% + 50mA
0.2% + 250mA
0.2% + 500mA
Ripple & Noise
≤ 2mVp-p, ≤ 3mArms
≤ 3mVp-p, ≤ 10mArms
≤ 10mVp-p, ≤ 10mArms
Load Regulation
0.01%+4mV, 0.01%+1mA
0.01%+8mV, 0.01%+5mA
0.01%+30mV, 0.01%+10mA
Line Regulation
0.01%+4mV, 0.01%+1mA
0.01%+8mV, 0.01%+5mA
0.01%+30mV, 0.01%+10mA
Command Processing Time
<20ms
<20ms
<20ms
Voltage Programming Speed(No load)
Rising time
≤ 120㎳
≤ 120㎳
≤ 120㎳
Falling time
≤3.6s
≤3.6s
≤3.6s
Dimension(WxHxD/mm)
300x150x465
426x356x650(8U)
426x844x550 Rack Mount
Transient Response time
Less than 50㎲ for output to recover to within 15mV following a change in output current from full load to half load or vice versa
Common details
RS-232C Standard
-
옵션
- RS-232C cable
- RS-485 cable
- OVP, OCP(Remote Communication control only)
- Output ON/OFF signal control
- Analog Programming(Vout & Iout voltage programming) & Monitoring(Output Voltage & Current Monitoring) by 0~5V or 0~10V, Isolated type
- AC Power Cord(Other type)
- AC Input 100V ±10%, 230V ±10%, 50~60Hz
- Rack Mount Support(Bracket and Shelf)
-
액세서리
- AC Power Cord(Type F)
- Operating Manual(QR Code)
- Demo software program(QR Code)
- Banana to Alligator DC Output Cables(+,-)
-
-