EX-TB Series
2018년 August 9일
0 
EX-TB Series
Switching Type Programmable DC Power Supply
High Performance, High Efficiency Compact size Product
EX-TB Series Single Output products are high-performance and high-efficiency programmable DC power supply with RS232C, RS485, USB, TCP/IP(option) interface based on SCPI (Standard Commands for Programmable Instruments) protocol and the combination of bench-top and system features in these power supplies provides versatile solutions for your design and test requirements in the industrial fields, R&D institute center and education fields.
Dimension
600W, 1.2KW : 265mm(W) x 75mm(H) x 404mm(D)
1.8KW, 2.4KW : 265mm(W) x 150mm(H) x 404mm(D)
| 1 | Power switch | 11 | Volt Cursor or Menu Change Key |
| 2 | 16Character, one line LCD Display | 12 | Curr Cursor or Menu Change Key |
| 3 | Error Lamp | 13 | Output ON/OFF Key |
| 4 | Limit Display Lamp | 14 | IO/Local Setting and Error Display Key |
| 5 | Key Lock Lamp | 15 | Protection Setting and Front-panel Lock Key |
| 6 | Remote Interface Lamp | 16 | Volt/Curr Setting Limit Display Key |
| 7 | CV Mode Lamp | 17 | Store or Calibration Key |
| 8 | CC Mode Lamp | 18 | Recall or Factory Key |
| 9 | Voltage Encoder Knob | ||
| 10 | Current Encoder Knob |
- 4-Digit Display Resolution
- 16×1 Big-Char Type LCD Display attached
- Adjustment encoder provided for voltage and current
- OVP (Over Voltage Protection), OCP (Over Current Protection) Protection Mode provided
- UVL (Under Voltage Lock), OVL (Over Voltage Lock), UCL (Under Current Lock), OCL (Over Current Lock)
- Calibration function provided (manual and PC)
- Panel Lock function provided
- Memory Store & Recall function provided (It is possible to store and recall 10)
- Output ON/ OFF function (Signal control is optional)
- Limit Display function provided
- 11 diverse Factory Modes provided
- RS-232C, RS485 Communication mode is basic(TCP/IP communication is optional)
- Single phase, AC Input 220VAC ±10% and 3 phase AC Input(option)
COMPACT SIZE
EX-TB Series is the smaller DC Power Supply which size is with 265mm(W) x 75mm(H)/150mm(H) x 404mm(D) up to 2.4kW.
It is developed from EX Series to provide spatial efficiency and same specification for customers.
It is developed from EX Series to provide spatial efficiency and same specification for customers.
PROTECTION MODE
Built-in OVP (Over Voltage Protection) and OCP (Over Current Protection) protection mode block the output when the output voltage and current are over the limit which user sets to protect the the load.
This can be used for safety despite user’s negligence or even while conducting test for a long time.
This can be used for safety despite user’s negligence or even while conducting test for a long time.
DUAL CONTROL ENCODER
Control encoder allocated to voltage and current respectively enables setting up faster to the desired mode compared to the existing single control encoder.
It is designed in a way that even the first time programmable product users can use it easily, and thus it can be applied to various areas.
It is designed in a way that even the first time programmable product users can use it easily, and thus it can be applied to various areas.
MEMORY STORE & RECALL
It can save and recall the voltage, current and state of use that user set ,even you are not an engineer, the user can easily use this function to inspect production and still can apply it for the reliability test etc by using this function that recalls the memory which was saved in advance.
Product Line-Up and Dimension
| Voltage |
Current |
Watt |
Dimension |
|
20V |
60A |
1,200 |
265mm(W) x 75mm(H) x 404mm(D) |
|
120A |
2,400 |
265mm(W) x 150mm(H) x 404mm(D) |
|
|
30V |
20A |
600 |
265mm(W) x 75mm(H) x 404mm(D) |
|
40A |
1,200 |
265mm(W) x 75mm(H) x 404mm(D) |
|
|
60A |
1,800 |
265mm(W) x 150mm(H) x 404mm(D) |
|
|
80A |
2,400 |
265mm(W) x 150mm(H) x 404mm(D) |
|
|
50V |
24A |
1,200 |
265mm(W) x 75mm(H) x 404mm(D) |
|
48A |
2,400 |
265mm(W) x 150mm(H) x 404mm(D) |
|
|
60V |
20A |
1,200 |
265mm(W) x 75mm(H) x 404mm(D) |
|
40A |
2,400 |
265mm(W) x 150mm(H) x 404mm(D) |
|
|
80V |
15A |
1,200 |
265mm(W) x 75mm(H) x 404mm(D) |
|
30A |
2,400 |
265mm(W) x 150mm(H) x 404mm(D) |
|
|
100V |
12A |
1,200 |
265mm(W) x 75mm(H) x 404mm(D) |
|
24A |
2,400 |
265mm(W) x 150mm(H) x 404mm(D) |
|
|
150V |
8A |
1,200 |
265mm(W) x 75mm(H) x 404mm(D) |
|
16A |
2,400 |
265mm(W) x 150mm(H) x 404mm(D) |
|
|
200V |
6A |
1,200 |
265mm(W) x 75mm(H) x 404mm(D) |
|
12A |
2,400 |
265mm(W) x 150mm(H) x 404mm(D) |
Accessories
* AC Power Cord(Type F)
* Operating Manual(QR Code)
* Demo software program(QR Code)
Options
* RS-232C cable
* RS- 485 cable
* TCP/IP communication
* Output ON/OFF signal control
* Analog Programing(Vout & Iout voltage programming) & Monitoring(Output Voltage & Current Monitoring) by 0~5V or 0~10V, Isotated type
* AC Power Cord(Other type)
* AC Input 380V or 400V± 10%, 3-phase 4-wire system(R,S,T,N,G), 50~60Hz
* AC Input 200V or 220V± 10%, 3-phase 3-wire system(R,S,T,G), 50~60Hz
