Linear Programmable DC Power Supply
Economical type, Single Channel
OPE-S Series is high performance programmable DC power supply with RS232C or RS485 interface based on SCPI (Standard Commands for Programmable Instruments) protocol and the combination of bench-top and system features in these power supplies provides versatile solutions for your design and test requirements in the industrial fields, R&D institute center and education fields.
Dimension
OPE-3010S : 213mm(W) x 88mm(H) x 362mm(D)
OPE-30100S : 426mm(W) x 356mm(H) x 650mm(D)(8U)
OPE-50200S : 600mm(W) x 1200mm(H) x 750mm(D)
1 | LCD Display | 8 | CC Mode Indication Lamp |
2 | Encoder Knob for Volt/Curr Change | 9 | Remote Control Mode Indication Lamp |
3 | IO/Local & Remote Key | 10 | + Output Terminal |
4 | Output ON/OFF Key | 11 | – Ouput Terminal |
5 | Volt/Curr Selection or Limit Display Key | 12 | Earth Ground |
6 | Cursor or Menu Change Key(or Store Key) | 13 | Power ON/OFF Switch |
7 | Cursor or Menu Change Key(or Recall Key) |
OPE Series can store and recall the voltage and current set by user. Even when a user is not an engineer, the user can use it easily for the production, product inspection, reliability test etc., with the Store and Recall function that set up and stored in advance.
Current Voltage |
1A |
2A |
3A |
5A |
10A |
20A |
30A |
---|---|---|---|---|---|---|---|
9V |
– |
– |
– |
– |
OPE-910S |
OPE-920S |
OPE-930S |
18V |
– |
– |
– |
OPE-185S |
OPE-1810S |
OPE-1820S |
OPE-1830S |
30V |
– |
– |
– |
|
OPE-3010S |
|
OPE-3030S |
50V |
– |
– |
OPE-503S |
OPE-505S |
OPE-5010S |
OPE-5020S |
OPE-5030S |
80V |
OPE-801S |
OPE-802S |
OPE-803S |
OPE-805S |
OPE-8010S |
OPE-8020S |
OPE-8030S |
100V |
OPE-1001S |
OPE-1002S |
OPE-1003S |
OPE-1005S |
OPE-10010S |
OPE-10020S |
OPE-10030S |
150V |
OPE-1501S |
OPE-1502S |
OPE-1503S |
OPE-1505S |
OPE-15010S |
OPE-15020S |
OPE-15030S |
200V |
OPE-2001S |
OPE-2002S |
OPE-2003S |
OPE-2005S |
OPE-20010S |
OPE-20020S |
– |
250V |
OPE-2501S |
OPE-2502S |
OPE-2503S |
OPE-2505S |
OPE-25010S |
OPE-25020S |
– |
300V |
OPE-3001S |
OPE-3002S |
OPE-3003S |
OPE-3005S |
OPE-30010S |
– |
– |
500V |
OPE-5001S |
– |
– |
– |
– |
– |
– |
Current Voltage |
50A |
80A |
100A |
150A |
200A |
---|---|---|---|---|---|
9V |
OPE-950S |
– |
OPE-9100S |
– |
OPE-9200S |
18V |
OPE-1850S |
OPE-1880S |
OPE-18100S |
– |
OPE-18200S |
30V |
OPE-3050S |
OPE-3080S |
OPE-30100S |
OPE-30150S |
– |
50V |
OPE-5050S |
OPE-5080S |
OPE-50100S |
– |
– |
80V |
OPE-8050S |
– |
– |
– |
– |
100V |
OPE-10050S |
– |
– |
– |
– |
150V |
– |
– |
– |
– |
– |
200V |
– |
– |
– |
– |
– |
250V |
– |
– |
– |
– |
– |
300V |
– |
– |
– |
– |
– |
500V |
– |
– |
– |
– |
– |
Model Parameter |
OPE-3010S |
OPE-30100S |
OPE-50200S |
|
---|---|---|---|---|
Output rating |
0~30V, 0~10A 1CH |
0~30V, 0~100A 1CH |
0~50V, 0~200A 1CH |
|
Resolution |
||||
Programming/Readback |
≤ 7.5mV / ≤ 4mA |
≤ 7.5mV / ≤ 25mA |
≤ 15mV / ≤ 50mA |
|
Display Meter |
100mV / 100mA |
100mV / 1A |
100mV / 1A |
|
Programming Accuracy (@25℃ ±5℃)±(%of output + offset) |
||||
Voltage |
0.2% + 200mV |
0.2% + 200mV |
0.2% + 300mV |
|
Current |
0.2% + 50mA |
0.2% + 500mA |
0.2% + 1A |
|
Read-back Accuracy (@25℃ ±5℃)±(%of output + offset) |
||||
Voltage |
0.2% + 200mV |
0.2% + 200mV |
0.2% + 300mV |
|
Current |
0.2% + 50mA |
0.2% + 500mA |
0.2% + 1A |
|
Ripple & Noise |
≤ 2mVp-p, ≤ 3mArms |
≤ 10mVp-p, ≤ 10mArms |
≤ 10mVp-p, ≤ 20mArms |
|
Load Regulation |
0.01%+4mV, 0.01%+1mA |
0.01%+30mV, 0.01%+10mA |
0.01%+50mV, 0.01%+10mA |
|
Line Regulation |
0.01%+4mV, 0.01%+1mA |
0.01%+30mV, 0.01%+10mA |
0.01%+50mV, 0.01%+10mA |
|
Command Processing Time |
<20ms |
<20ms |
<20ms |
|
Voltage Programming Speed(No load) |
||||
Rising time |
≤ 120㎳ |
≤ 120㎳ |
≤ 120㎳ |
|
Falling time |
≤3.6s |
≤3.6s |
≤3.6s |
|
Dimension(W*H*D mm) |
213x88x362 | 426x265x650(8U) | 600x1200x750 | |
Transient Response time |
Less than 50㎲ for output to recover to within 15mV following a change in output current from full load to half load or vice versa |
|||
Common details |
RS-232C Standard |